If you are facing a CHKDSK Freezing During Disk Check error, then you have come to the right place. This article will tell you how to Overcome CHKDSK Freezing During Disk Check.
As Windows users, you must have used the chkdsk command to check hard disk corruption and repair for best performance. Well, this is a very useful command in Windows OS, but unfortunately, Many times, the disk check fails, and the chkdsk command gets stuck at some percentage like 10 %, 11 %, 12 %, 100 %, even chkdsk hangs at some particular stage.
So, if you are stuck in Windows chkdsk, or you are facing a chkdsk issue, then this article is for you. Here, you will be fully told what to do when stuck in the scanning process or why it happens.
What does the CHKDSK command do?
Use the check disk command in Windows to verify the integrity of the file system, check for disk errors, and repair errors.
Well, system problems and errors are caused by various things such as the system not shutting down, accidental power failure during operation, or removing USB devices without using Safely Remove, malware, and viruses. Corruption has many other causes.
How to fix errors in Windows 7/8/10 by running the chkdsk command.
Why chkdsk Stuck or freez?
If CHKDSK gets stuck while scanning or during the repair process, the problem can also be caused by file corruption of Windows system files.
This causes the CHKDSK command to get stuck in the middle. There are other reasons why CHKDSK hangs or stops working. Here, check some of the most common ones:
- Because of temporary files
- Outdated or unknown device drivers
- Scanning hardware problems such as damage or corruption
- Permanent damage to hardware
- Or scanning different sections such as indexing indexing within indexing security dicks corporate acting on
So here are some common causes of the Windows 10 CHKDSK stuck problem: Now let’s see how long it takes to fix this chkdsk stuck problem in Windows 10.
How long does CHKDSK take in Windows 10?
The time of scanning usually depends on the size of the selected driver and the amount of corrupt files. So it takes three times the time. Well, that’s a lot of time. It’s demanding, and there’s an easy solution to this problem. Wait, be patient.
Many users have reported that the scanning and repair process continues without any change in the scanning progress, except that sometimes the scanning process restarts automatically when the user restarts their system.
So, if you are using large hardware, it can be worse. The scanning process can be quite long, and it is best to leave the CHKDSK scanning process running overnight.
So, make sure there is indeed a problem with the CHKDSK command. Even if scanning doesn’t resume after restarting the system, if it seems stuck, then try the fixes below.
How Can I Fix Chkdsk Stuck or Frozen in Windows 10/8/7?
If after waiting all night or hours window is still stuck at 10 or 11 12 chkdsk or 27%, it’s different stages like chkdsk stuck at stage 3, then follow the fixes one by one.
Fixing 1: Stop running CHKDSK
The easiest way to get rid of the Windows 10 chkdsk stuck issue is to stop the running command. To do this, follow these steps:
- Number one: restart your system, press ESC or press enter, or press the applicable key to run the command.
Follow the steps below to practically fix the chkdsk command after stopping it
Fixing 2: Run Disk Cleanup
As I told you above, chkdsk also gets stuck or hangs due to temporary files by the Windows system. chkdsk gets stuck while scanning these files, so to solve the problem system disk is Clean.
And to fix it easily, I would suggest you use the Disk Cleanup utility on the system.
To do this, follow these steps:
- Press the Windows + S key and write disk cleanup from the menu. Choose Disk Cleanup
- Next, select System Drive and click OK
- Now check the files you want to remove, like temporary files, temporary internet files, etc
- After selecting the desired options, click OK to continue
- Wait until the window detects the selected file
As soon as the temporary files are deleted, Windows 10 chkdsk will check if the stuck problem is fixed or not. If the problem still occurs, try the next steps below.
Fixing 3: Perform SFC and DISM Scan
You may face a chkdsk stuck or freeze problem due to system file corruption. So, to fix this problem, you can use to run an SFC scan, and if that doesn’t work, then run the DISM command.
- For open Command Prompt, Press Win + X menu
- Now, in the command prompt, write sfc/scannow and press enter.
- Now, wait for the scanning to complete. It will take about 15 minutes
As soon as the scanning is complete, check if the issue is resolved. If not, run the DISM command
To do this, follow these steps:
- Press the Windows + X key to start an administrative command prompt
- Now write the command Dism/Online/Cleanup-Image/RestoreHealth in the command prompt
- Please wait for the scanning process to complete. It will take about 20 minutes.
This repairs damaged system files and is expected to prevent chkdsk from getting stuck or hanging.
Fixing 4: Stop Error Restart
To fix the chkdsk stuck issue, easily press shortcut Ctrl+Alt+Del, and after doing that, try to restart the error.
To do this, follow these steps:
- Turn off your computer first, then turn it on again
- When the system boots, press and hold the F8 key to boot into safe mode
- Next, select Disable error restart
If the Windows 10 chkdsk stuck issue is still not resolved after doing this, try the solutions below.
Fixing 5: Perform Clean boot
If, after using all the fixes above, it still doesn’t work for you, then doing a cleaning boot will help you fix the chkdsk stuck or freeze problem.
To do this, follow these steps:
- In the search box, write System Configuration from the menu selector System Configuration
- Now, on the Services tab, select and click the Hide All Microsoft services box and Disable All.
- Now, on the Startup tab, click Open Task Manager.
- Next, In the Task Manager, click on the Startup tab, then right-click on the list and select Disable it in the menu. Then, a task is repeated for all items.
- Then, on the Startup tab of the System Configuration box, hit OK and choose Restart your computer.
- As the system restarts.
Check if the Windows 10 chkdsk stuck issue is resolved or not, but if the issue persists, then re-enable all disabled apps and services.
Fixing 6: Stop CHKDSK in Progress Using Command Prompt
- Press the Windows key and then write cmd.exe in the search box
- Then open the Command Prompt and Run as administrator.
- Now write chkntfs /x c: > hit Enter.
Doing so will stop CHKDSK from running in the Windows operating system.
You Can Make your Windows PC/Laptop Error Free
Well, if you can’t work with the given manual method or if you find your Windows system slow after fixing chkdsk crashes or hangs, then I suggest you run this repairing tool. It’s a powerful tool that detects and fixes all Windows problems and errors with just one scan.
It can prevent DLL errors, application errors, and many other things. It not only fixes errors but also improves the performance of Windows PCs, and the best part is that it is very easy to use.
You can check the article: How To Back Up Save Game Files In Windows 10?
Conclusion
This article was about solving the chkdsk stuck problem in Windows 7/8/10, so I did my job and tried my best to collect as many terms as possible to solve the chkdsk stuck problem in Windows, given fixes one by one. Follow them and check if Chkdsk has stopped working or not.
Also, if you have any other queries, then you can comment in below comment box below and follow us on Twitter and Facebook to see more articles like this.
Good Luck!
