If you can increase the storage of your PS5 then don’t worry this article is for you. In this article, we learn How to set up my PS5 SSD.
The most effective option to expand your PS5’s capacity, which is necessary if you frequently download games to your system, is to install an M.2 SSD. If you’ve never installed an SSD before, it may look difficult, but with a little practice, it should only take a few minutes to finish. But we’ve put together a beginner-friendly guide to help you through the process to make it all easier.
From a hardware viewpoint, the PS5 is an amazing console, but it has a severe storage issue. Even though the box says it has 825GB of accessible space, the system operating system and other necessary files take up 677.2GB of that total. You have a little bit more storage available if you’re using the more recent PS5 Slim model, which has 1TB of usable space (of which the system uses about 150GB).
no matter the model you’re using, you’ll eventually run out of space because the greatest PS5 games are getting bigger. Your PS5’s M.2 SSD installation puts an end to that issue. For this reason, you must buy one of the top SSDs for the PS5.
To have a native connection with the internal NVMe SSD of the PS5, you will have to go the internal path. The best PS5 external hard drives are available, but if you’re thinking about getting one, bear in mind that you can’t play games on them—you can only store them to be installed later. Instead, installing an M.2 SSD is the recommended option. We’re also offering you the greatest PS5 controllers and monitors for the complete console experience.
How Can I install an M.2 SSD in your PS5
It’s important to understand that not every NVMe drive can fit into your PS5 before we begin. A Gen 4.0 model with a continuous speed of at least 5,500 MB/s is required. It’s also necessary to have a PS5 SSD radiator; some versions have one built in, while others can be made yourself. As you’ll see later in the article, the heatsink can also serve as the M.2 cover in some situations.
The complete specs according to Sony’s standards are as follows:
PS5 requirement for storage
| Interface | 4 M.2 NVMexSSD PCIe Gen4 |
| Capacity | 250GB – 4TB |
| Cooling structure | A cooling structure, like a radiator, is necessary for the proper removal of heat when using an M.2 SSD with a PS5 console. One can be installed on your M.2 SSD by you, either in a double-sided or single-sided format. Additionally, some M.2 SSDs come with included cooling components like radiators. |
| read speed carefully | 5,500 MB/s or more quickly is suggested. |
| Module width | 22 mm wide (no support for 25 mm wide) |
| Form Factor | 2230, 2242, 2260, 2280, and 22110 M.2 types |
| Socket type | Socket 3 (Key M) |
| Total lengths, including the cooling system | less than 110 x 25 x 11.25 mm (L x W) in height |
BEFORE GETTING STARTED
A few things are required, but there isn’t much involved in inserting an M.2 SSD into your PS5. You will need a large flathead screwdriver (to attach and remove the stand. Whether it is installed vertically or horizontally) in addition to the PS5 SSD itself. You will also need a #1 Phillips screwdriver (size 01), which is utilized for the M.2 port itself.
The PS5 console works best when it is placed on a level hardwood surface because of the way the side panels are designed, which makes it difficult for the console to sit flush on its side. It’s necessary to have good lighting so you can see what you’re doing.
The included stand for the PS5 console can be removed with a flathead screwdriver. This can be installed vertically or horizontally, but it must be removed before you can access the area under the side panels. You just need to turn the big screw to make it come loose. Put the stand and screw to one side after that
OPENING UP THE PS5
To reach the M.2 port on the PS5, you will need to remove the cover that covers the disc drive side. This may require some force and be a little tricky, but it’s simple once you know how. You should take a firm hold of the upper left corner and lift it. Next, you should be able to remove the cover by sliding it to the right with your other hand. If you exert sufficient effort at the top, it only requires a slight push to release the plastic clip that is removed from the steel frame.
INSTALLING THE M.2 SSD
After removing the side panel, the next step is to remove the M.2 port cover on the PS5, which is when the Phillips head screwdriver comes in handy. When it’s removed, you’ll see that there’s room for your preferred NVMe SSD. This is where we currently store our preferred drive, the PNY XLR8 Gaming Kit for PS5.
The guideline remains the same regardless of the SSD for the PS5 model you choose. Every drive needs to be inserted carefully at a 45-degree angle. This is to provide correct pin-to-pin contact between the NVMe M.2 connectors. After that, you have to use the standfirst that fits inside the port to carefully hold the drive down and screw it into place.
The original M.2 cover is replaced by a customized one on our specific storage drive. To help with cooling, this one uses a removable heat pad that goes to the NVMe itself. About that, the SSD itself isn’t heat-limited thanks to a big aluminum radiator that keeps the entire port cool. This should allow for slightly improved orderly performance.
After everything is removed, all that’s left to do is replace the PS5 cover. This is much simpler than taking it off. Just align it roughly with where it sits on the system and press to the left. It will be finished when you feel and hear a click. For the final step, you can now plug the HDMI lead and power cord back into your console.
You can check the article: Grand Theft Auto 6 (GTA 6)
FORMATTING THE PS5 SSD
The formatting is the only thing keeping you from having that additional overhead on your PS5 device. Once the drive has been fitted correctly. You should see a prompt at boot-up informing you that formatting is required for the M.2 SSD you installed on your computer.
Luckily, you can get Sony’s internal benchmark that provides the read rates in a matter of seconds at most after this. The information that was provided to us, is 6,198 MB/s. Is much higher than the 5,500 MB/s minimum orderly amount that is advised.
With everything out of the way, you can now begin moving some of your larger games to the NVMe M.2 drive, or you can just go ahead and begin filling it full.
If you’re like me and a bit of a heavy user. You like to have your backlog list installed and accessible without having to spend hours, depending on your internet connection, deleting and reinstalling it. You’ll need as much space as possible because modern games may be quite large. God of War Ragnarok. For example, weighs 84 GB—especially if you’re using the PS5 Digital Edition or you like to download games rather than buy discs. For them to function, installation is still required, regardless of the mode of delivery!
And that’s it! You may now install and download all of your favorite games with far fewer storage space limitations. The system’s heavyweights, like Gran Turismo 7, Spider-Man: Miles Morales, and Horizon Forbidden West, are now much easier to access. You won’t need to worry about storage for quite some time. Because there will be more first-party games coming out soon. Especially if you choose a 2TB or larger drive.
If you have any questions about this topic then contact us on Twitter and Facebook pages.
![[BEST WAYS] How to Fix Netflix Error UI3012?](https://i0.wp.com/techcoresolutions.info/wp-content/uploads/2023/11/NETTI-NETTI-1.jpg?fit=300%2C141&ssl=1)
